Próbowałem z róznymi ustawieniami i mam problem z komunikacja Ic7300 z Log4OM tzn. >,>, USB Keying (RTTY) set to Off (I need to test if this is really needed.) >,>, USB Keying (CW) set to off (I need to test if this is really needed.) >,>, CI-V >,>, CI-V Output (for ANT) ON, CI-V USB Port set to Link to Remote >,>, DATA OFF MOD is left at default MIC,ACC MENU >,>, SET >,>, Connectors >,>,ACC/USB AF Output Level set at 34 percent (prevents overdrive of the signal) Thought was very helpful in figuring out the settings in the IC-7300OO > USB Keying (RTTY) set to Off (I need to test if this is really needed.)Īlso check out the YouTube video from Tomasz Miklas which I > USB Keying (CW) set to off (I need to test if this is really needed.) > CI-V > CI-V Output (for ANT) ON, CI-V USB Port set to Link to Remote > DATA OFF MOD is left at default MIC,ACC MENU > SET > Connectors >ACC/USB AF Output Level set at 34 percent (prevents overdrive of the signal) But please make a backup ofĪll of your IC-7300 settings to the radio’s integrated SD card before you change any of these setting on your IC-7300. Next go into the IC-7300 and change the following from the Default Settings in the IC-7300. Note that some people’s set up prefers the slower 9600bps speed, so you may want to try thatįirst and then move up to 19,200 if your pc to IC-7300 set up will allow it to function without problems. IC7300 has only on Antenna port, and a few other buttons that you may want to change in Ham Radio Deluxe)Īfter making sure that is set up correctly Here is what you should set up your free edition of Ham Radio Deluxe, and (Optional - Edit down the buttons to get rid of the 4 antenna ports, since the Select ICOM 7700 as the radio type in Ham Radio Deluxe (HRD) I use the free edition. I set this to COM2 but other COM ports should work

Method I used DTR on port COM2 and set the mode to Data/Pkt with the Split Operation set as Rig (Note: 9600 for the baud rate works better for some older PCs) For the PTT

Set computer Baud rate at 19200 8/N/1 with None selected for the Hardware Handshake(XON/XOFF or CTS/DTR) on theĬOM port associated with the USB port. Niemniej gdyby ktoś znalazł się w podobnej sytuacji to poniżej ma 'gotowca'. Niby prozaiczne, ale chyba na wstępie tak namieszałem w ustawieniach radia że trudnością okazał się powrót do normalności Kluczowa okazała się wskazówka w wątku, do którego 'dokopał' się Mirek:

Dzięki zaangażowaniu i wsparciu kolegów SQ6NEJ i SQ6VIA rozwiazałem problem!

Ham radio deluxe icom 7300